Show Your COLORS! Make a Faux Stained Glass Sun Catcher by Tanya Ruffin

You can make a faux stain glass sun catcher,
using Amazing Clear Cast Resin as a faux gallery glass!

Supplies:

• 8" x 10" picture frame
• Amazing Clear Cast Resin
• Alumilite Violet and Yellow Dyes
• Puff Paint

Print out of the computer an 8" x 10" design.

Take the glass out of the frame and place on top of print out.

Using puff paint, trace over your design. Make the lines thick because these will be a wall to hold the resin. The Amazing Clear Cast Resin is much thinner than gallery glass so your walls much be thick and tall or your resin will bleed over.

Allow your puff paint to dry. Mix up batches of colors of Amazing Clear Cast Resin with Alumilite Violet and Yellow Dyes, let rest to release bubbles for a few minutes and start to fill the inside of the design with resin. Do NOT fill to the top, when the Amazing Clear Cast Resin starts to cure it sometimes expands and will overflow.

You can see in the image above that I had a little spillage.

SO I ended up marbleizing the yellow area.

Finished off and ready to shine!

There ya go. Now go off and be creative!

I'd love to hear what you are inspired to create with Amazing Crafting Products!

Please leave a comment below :)

Please visit my site to see more of my inspiring creations. Thanks for visiting! ~ Tanya

...........................................

Don't miss a single post!

Please subscribe to our blog on the right side bar:

Twitter at @AmazingCrafting | Facebook at AmazingMoldPutty | YouTube at AmazingMoldPutty