A #Cre8time Angel in Disguise... AMAZING Inspiration by Michele Kosciolek

Hello friends! Michele back again with another way I've used casts of my butterfly – but this time just the wings...

For the project I am sharing today, I poured Amazing Casting Resin into just in the wings so they would be two separate pieces.

Here is a little reminder of the original mold.

CLICK HERE in case you missed it.

The wings bring my angel to life combined with some Tim Holtz Ideology bits, an Um Wow Studio chipboard word, Art Alchemy wax and Dina Wakley paint. The Art Alchemy wax and Distress glitter on the wings show the detail of the resin cast wings so well!

A little cheese cloth and thread make my angel in disguise pop! There are so many ways to use your molds, just a little thinking outside the box and viola!

What are you molding/casting

for use in mixed media?

Thanks for coming back to see what I have been up too!!

Until next time... ~ Michele

For more projects and inspiration please visit my blog "Stuff by Belle"
or follow on Facebook: https://www.facebook.com/michele.kosciolek

Instagram: stuffbybelle
Pinterest: http://www.pinterest.com/bybellemk/

• • • • • • • • • • • • 

Don't forget to subscribe to our blog on the right side bar:

Twitter at AmazingCasting | Facebook at AmazingMoldPutty | YouTube at AmazingMoldPutty

#Cre8time Explorations... DIY Butterflies with Michele Kosciolek

Hello friends! Michele here... I am in spring cleaning mode in my craft room and came across a butterfly knob that I stashed away to mold on a rainy day. Well since I found it and it happened to be raining, I got busy molding and casting.

I used Amazing Mold Putty to mold the knob.

I sized my mold putty just a tad smaller than the knob.

Because when you push item into

the Amazing Mold Putty it will spread.

Just look at all the detail! This mold can be used a couple of ways, to mold the entire butterfly or just the wings.

Next I cast with Amazing Clear Cast Resin, but first I painted some Alumilite Pearlescent Powder in the mold.

First the pearlescent on the wings, and then

a little bronze metallic powder on the body.

I mixed the Amazing Clear Cast Resin and poured into the mold – right over the powder.

I had a bit of the resin left so I grabbed a dictionary page that I want to use as a page in a book I will be making at a workshop this month... never waste leftovers!!

For the next casting, I used Amazing Casting Resin mixed with brown Alumilite Dye. I wanted it to look like Bronze so first I used the Bronze Metallic Powder in the mold.

These two casts from the same mold turned out so different!!

The Amazing Clear Cast Resin with powder...

and the Amazing Casting Resin with the metallic powder and dye.

I am really looking forward to seeing how using

 just the wings works out too. What a versatile mold!

Be on the look out for these on future projects!!

What found objects would

you mold for Cre8time play?

Thanks for sharing part of you day with us!!!

Until next time... ~ Michele

For more projects and inspiration please visit my blog "Stuff by Belle"
or follow on Facebook: https://www.facebook.com/michele.kosciolek

Instagram: stuffbybelle
Pinterest: http://www.pinterest.com/bybellemk/

• • • • • • • • • • • • 

Don't forget to subscribe to our blog on the right side bar:

Twitter at AmazingCasting | Facebook at AmazingMoldPutty | YouTube at AmazingMoldPutty

#Cre8time Transformations... DIY Easter Gift by Brenda Burfeind

Good day and Happy Easter everyone! Brenda here and today I want to share a project I made for my Mom for Easter. I received this cross awhile back and I love it dearly, but it's a bit heavy. Of course, since the Amazing Casting Resin is so lightweight, I decided to use it to make a lighter version of the cross to use as an embellishment.

  

I started with my Amazing Mold Putty and making a mold for my cross. Since the cross is a bit larger I had to mold it in chunks. You don't want to try to mold something bigger all at once since the mold putty sets up rather quickly {CLICK HERE to view mixing/preparation}. I started with the top half and let it set up; then mixed up another batch and pressed it onto the started portion and formed around to complete the bottom half.

After I mixed up a batch of Amazing Casting Resin colored with a little bit of Bubblegum Alumidust. CLICK HERE to view mixing/preparation. I poured the resin into my mold and it sets up within 10-15 minutes. I can't wait to pull it out of the mold!

The cross has so much detail, but it's hard to see like this!

For Christmas I received some Art-C products that I have been dying to try out. They are similar to rub and buff and I knew these would bring out the beauty and detail of this cross.

The gold and silver combination is stunning!

Now here you can see how "thick" the original cross is – and I can control how "thick" or "skinny" I want to make my resin duplicate within the mold by how much or how little resin I pour into my mold.

Because the resin piece is so lightweight I was able to attach it to my paper flower heart with just some hot glue without "smashing" the roses. I put a hanger on the back and its ready for gifting!

I hope you've enjoyed this tutorial. I would love to see some of your creations using Amazing Casting Products. Please leave me a comment with a link to your project and I will be sure to check it out.

Until next time... Happy Crafting!
~ Brenda with Creativity is a State of Mind 

• • • • • • • • • • • • • • • • •

Don't forget to subscribe to our blog on the right side bar:

Twitter at AmazingCasting | Facebook at AmazingMoldPutty | YouTube at AmazingMoldPutty

#Cre8time Egg Decorating... AMAZING Easter Ornaments by Tracy Krueger

Hello, it's Tracy here! Being that Easter is right around the corner, I was trying to think of a quick and fun Egg decorating project. My kids are grown so we don't decorate real eggs anymore.

Then the simplest idea came to me! I have a mold that I had made out of a cut piece of brass (to make a Christmas ornament) and it has an Egg shape. I first mixed two equal parts of Amazing Casting Resin and poured it into my mold to give it a "egg base". I just love watching the Casting Resin cure... don't you :-)

After this base egg cured (I gave it about 15 minutes), I gathered three of my Alumilite Dyes that would be good for Easter – Blue, Purple and Yellow. I poured out very small equal portions of Amazing Casting Resin and squeezed out a tiny drop of each color into part "A" of the resin, then stirred color completely before adding part "B". CLICK HERE to view mixing/preparation.

The first color I mixed up was the yellow, and poured

random lines on top of my white cured resin.

As the yellow was curing, I was thinking "there has to be a better way to have more control over the colored resin". Awhile back I bought a bunch of disposable pipettes, so after the yellow cured, I mixed up the blue dyed resin and used the pipette to draw where I wanted my colored resin to go. It worked beautifully! I just love how I got some green where the blue was over the yellow.

Now I just had purple left. I mixed it up and used another pipette to squeeze the purple where I wanted. As always I kept a spare mold around to pour the extra resin in.

Once I was done applying the three resin colors, I let the whole thing cure for a couple of hours to make sure everything was set totally.

I took it out of the mold and trimmed the back a little, then drilled a hole in the top. I grabbed my sari ribbons and cut a small piece of a greenish/blue colored one.

I really like how this turned out.

It has kind of a watercolor look about it.

Isn't it fun that you can mix up your Holidays and make decorations for both?! I had quite a few more ideas, but have had a hard time getting them to come to fruition. I'll be back soon to share a few of my bad EGGS. 

How are you decorating for Easter?

Have fun! ~ Tracy

You can find more of my work on my Blog:
http://tracykrueger-nine.blogspot.com/2017/

or follow me on Facebook:
https://www.facebook.com/tracy.albrechtsonkrueger

or Instagram: www.instagram.com/tgkrueger

• • • • • • • • • • • • • • • • •

Don't forget to subscribe to our blog on the right side bar:

Twitter at AmazingCasting | Facebook at AmazingMoldPutty | YouTube at AmazingMoldPutty

How does your #Cre8time Garden Grow... Amazing Inspiration from Susan M. Brown {sbartist}

Hello Everyone... Susan here sharing some amazing inspiration... an upcycled mixed media project full of sunshine using Amazing Casting Products!

This project is a compilation of bits of this and that on my craft room table inspired by some castings of a house created from an embroidery kit frame molded using Amazing Mold Putty. I had one of these in a baggy with some scraps of papers, embellishments and ribbon – seems like a perfect time to do some Cre8time SPRING cleaning!

I monoprinted a pattern onto a leftover section of muslin fabric using my Amazing No-Gelatin Rubber Plate impressed with large bubble wrap into the white paint to make a nice muted sky background. To this I add some stamped foilage and stencil sprayed sunrays, then begin layering my assortment of ephemera, trim, gems and dimensional items.

I cut a section of painted patterned paper to fit behind my cast resin house. Inside a cast resin domino with sticky back gems for window {molded in Amazing Mold Rubber cast in Amazing Casting Resin}, a mini metal bicycle charm, green burlap trim, and pen doodling make this house a home... topped off with a green gingham bow! With the addition of a pearled flower as a "sun"... this sunny garden scene is complete!

I hope you enjoyed this mixed-media garden I've created

from an assortment of leftovers in my Cre8time stash. 

What kind of garden would you create? 

Thanks for visiting. If you would like to see more of my creations,

please visit my blog sbartist : painting in the dark by clicking here. ~ Susan

• • • • • • • • • • • • • • • • •

Don't forget to subscribe to our blog on the right side bar:

Twitter at AmazingCasting | Facebook at AmazingMoldPutty | YouTube at AmazingMoldPutty

A new Season for Molding and Making... #NationalCraftMonth

Hello Amazing Makers! Did you know that March is National Crafts month and the perfect time to try something new. What are you currently working on in your Cre8time?

Spring is just around the corner {for many of us} which brings a whole new season of projects using Amazing Casting Products. Just imagine what you could create for Saint Patrick's Day or Easter! Jewelry, embellishments, home decor... or DIY chocolates and fondant cake toppers?!!

Have you met Amazing Mold Putty?!

If you have never tried this magical yellow goodness... meet your new BFF and soon to be go-to Cre8time favorite – Amazing Mold Putty!!

Amazing Mold Putty is easy-to-use and one of the most versatile moldmaking products from Amazing Casting Products. Not only is it FOOD SAFE, but you can bake the molds up to 375º F – making it wonderful for detailed polymer clay pushmolds, making custom shaped crayons, candles and more! 

What will you mold today?

Share your amazing molds and makes with us on social media

using hashtag #AmazingCastingProducts.

• • • • • • • • • • • • • •

Don't forget to subscribe to our blog on the right side bar:

Twitter at AmazingCasting | Facebook at AmazingMoldPutty | YouTube at AmazingMoldPutty

#Cre8time for Ocean Magic... by Kristie Taylor

Hello everyone! Do you ever create something and find it leads to an avalanche of ideas?! It happens to me all the time. Kristie here to share another under-the-sea creation... and how you can make some "Ocean Magic" in your Cre8time.

This all started when I was working on another mixed-media piece featuring a lovely handmade resin casting of a starfish which was an old refrigerator magnet I retired to my crafty stash {CLICK HERE if you missed it}.

Let me show you how easy it is!

First, we need a LOT of molds... a LOT! Let's start by molding some seashells with Amazing Mold Putty {CLICK HERE to view how to quick and easy it is to make a mold}. 

Remember, when making molds for mixed media, all sides of the object can be used!

 

 

Just look at all that yummy texture – and beautiful details!

I especially love this one!

Now we need castings of the seashells.

Begin with pouring equal amounts of Part "A" and Part "B" of Amazing Casting Resin {CLICK HERE to view mixing and preparation}. 

In a larger cup, combine both parts and stir for two minutes... then pour in to molds!

   

Wait until it resin cures and turns an opaque white – 

now you have amazing castings to use in your art!

I paint all the castings with gesso.

While that dries, we need to prep our substrate {for this project I've used the back of a small canvas}. Use modeling paste through a stencil. This is one of my stencil designs called "30 Point Mandala" on the outside edge.

In the center of the canvas, I used another one

of my stencil designs called "Symmetrical Waves".

Once modeling paste is dry, paint the entire surface with gesso.

Once the gesso is dry, I painted the canvas with a variety of Art Anthology paints.

I start to add the primed resin casts and painting them as I go.

On the starfish, I used a combination: first some alcohol ink,

then when dry, adding sparking minx by Art Anthology.

Then I used some metallic rubs to highlight the details.

I added some small seashells, sea glass and

some mesh to further enhance that ocean feel...

  

and more metallic rubs to highlight all the great texture on the seashells!

How's that for some "Ocean Magic"! Another undersea creation featuring my seahorse! The wonder of Amazing Mold Putty and Amazing Casting Resin – you can create a mold, and use an object more than once, in so many ways! 

What will you create using these

Amazing Casting Products??!

Thank you so much for stopping by today! ~ Kristie

To see more of my work, please visit my blog, "The Scrapinater", 

over on my YouTube Channel or on Instagram.

• • • • • • • • • • • • • • • • •

Don't forget to subscribe to our blog on the right side bar:

Twitter at AmazingCasting | Facebook at AmazingMoldPutty | YouTube at AmazingMoldPutty